Concrete Cutting in Redmond, WA
Flat and slab sawing, wall sawing, core drilling and concrete removal for Redmond tenant improvements, campus and light-industrial projects and homes, dispatched from our Seattle base, minutes across SR-520.
30 reviews, every one five stars
Family-owned since 1999
WA Lic. SILERCC804RT · USDOT 3663541
Licensed & insured · 24/7 availability
A Concrete Cutting Contractor for Redmond’s Campuses and Build-Outs
Redmond builds around its employers: corporate campuses in Overlake and along the SR-520 corridor, flex and light-industrial space on Willows Road and in SE Redmond, mixed-use projects downtown and at Marymoor Village, and a steady run of remodels across Education Hill, Grass Lawn and Redmond Ridge. All of it runs into concrete sooner or later: a slab that needs a trench, a wall that needs an opening, a post-tension deck that needs a careful core.
That’s the work Siler’s Concrete Cutting has done across Western Washington since 1999. Our crews are based in Seattle, which puts Redmond minutes away over SR-520, close enough for same-day estimates, tight tenant-improvement schedules and after-hours windows when an occupied building demands them.
General contractors get the same discipline on the Eastside that our reviews describe everywhere else: cuts that land where the drawings say, water-cooled blades that keep dust down in occupied spaces, sequencing around the other trades, and a site left clean. Homeowners get the same crews for basement openings, egress windows and slab work. No job is too small to quote.
And one call covers the whole cycle: the cut itself, breaking and haul-off of what comes out, and the trench pour-back when concrete needs to go back in.
Why Eastside Clients Call Siler’s
5.0-star Google rating across 30 reviews
Family-owned and operating since 1999
Licensed & insured, WA Lic. SILERCC804RT
24/7 availability, nights and weekends included
One crew: cut, break out, haul off, pour back
Why Contractors & Homeowners Choose Siler’s
Family-owned and operated since 1999.
Every one of our 30 reviews is five stars.
WA SILERCC804RT · USDOT 3663541
Nights, weekends and tight pour schedules.
Concrete Cutting Services We Deliver in Redmond
Every service below is performed by our own crews. The same equipment and standards on a Redmond campus build-out as on any job in Seattle or Tacoma.
Flat / Slab Sawing
Trenches, openings and expansion joints in slabs, floors and pavement, the workhorse cut behind most Redmond TI and remodel work.
Concrete Wall Sawing
Door and window openings, HVAC penetrations and structural modifications cut clean in vertical concrete, commercial and residential.
Concrete Core Drilling
Round penetrations from 1 to 72 inches for plumbing, electrical and mechanical runs, drilled to spec, floors, walls or ceilings.
Concrete Wire Sawing
Diamond wire cutting for sections beyond blade reach: thick structural elements, cut vibration-free.
Concrete Breaking & Disposal
Cut sections broken out with control, loaded into our own trucks and hauled off, recycled wherever possible.
Trench Pour-Back
The utility trenches we cut and remove, reinforced and poured back by the same crew, plus pads, slabs and sidewalks when the job needs them.
Cut. Core. Break Out. Haul Off. One Crew.
A cut-only contractor leaves the break-out and the haul-off to somebody else. Siler’s cuts to your marked lines, breaks out the sections and hauls them off with one Redmond crew, so nothing falls between subs.
Free Estimate
Call (206) 901-9383 or send us the job details. Fast quotes, and 24/7 availability means we work around your schedule, not the other way around.
Plan the Cut
Dimensions, depth, access and your marked lines are confirmed before the saw shows up, with dust, water and an occupied building planned for.
Cut to the Line
Flat, wall, wire or core: cut to your marked lines, water-cooled, dust kept under control, square where it needs to be square.
Break Out & Haul Off
Cut sections are broken out and leave in our own trucks, so nobody waits on a second sub. Utility trenches we cut can be poured back by the same crew.
Sound Familiar?
✕ An opening that’s out of square, so the frame or the duct doesn’t fit.
✕ A second sub to schedule for haul-off, and a third for the pour-back.
We built our process to take every one of these off your plate. One call. One crew. One line on your schedule.
Recent Projects From the Crews That Serve Redmond
Every project below is real, documented work by our crews, the same crews that dispatch to Redmond:
Kirkland Road Expansion
Road sawing on Juanita Blvd in Kirkland (the next city over) with old road sections running 16 inches-plus thick.
Wall Saw Openings for an Office TI
Door openings wall-sawed through CMU block for an office building improvement, the same cut Redmond suites need when one space becomes two.
Suspended Slab Removal
An 18 to 20-inch suspended slab removed to bring daylight into new basement apartment units in a downtown Seattle building.
Have a Job Like These in Redmond?
Send us the plans or talk to the crew directly. Free estimates, 24/7 availability, one crew from first cut to pour-back.
5.0 on Google From 30 Reviews
Real reviews from Western Washington homeowners and general contractors.
“Larry Jr.’s work ethic and ability to motivate his crew give you the confidence that the job will be done properly, safely and professionally. Recommend 10/10.”
Jeff Z.
Five-Star Google Review
“As on owner of a commercial GC firm these are our go to saw-cutters. Always enjoy working with the Siler’s team.”
Derrick M.
Five-Star Google Review
“Siler’s did a fantastic job cutting my concrete slabs. They worked around my complex schedule and the crew was very efficient and professional.”
Hawa U.
Five-Star Google Review
Redmond Service Area
Rated 5.0 on Google, Serving All of Redmond
Siler’s Concrete Cutting holds a 5.0-star rating on Google from 30 reviews, earned one clean, on-time cut at a time. Our crews dispatch from Seattle across the lake every working day, covering Redmond and the wider Eastside.
Need us on site? Call (206) 901-9383 for a free estimate, or find us on Google.
Concrete Cutting in Redmond, Answered
Concrete Cutting Across Redmond & Western Washington
From our Seattle base, the same crews cover Redmond, the Eastside and the whole Puget Sound region. Explore our other service areas:
Need Concrete Cutting in Redmond?
Get a free estimate today. Tell us about the job or talk to the crew directly.
What We Cut in Redmond
Redmond’s construction profile leans commercial, and that’s where our crews spend most of their time. Campus and office tenant improvements need trench cuts through slabs for new plumbing and power, core-drilled penetrations for mechanical and data runs, and wall openings that reconfigure a floor plate. Flex and light-industrial buildings on Willows Road and in SE Redmond add dock modifications, equipment pads and footing changes to the list. Where an owner wants to know what is inside a post-tension deck first, a GPR scan is available on request before the cut or core.
Residential Redmond calls look different but use the same saws: basement egress windows cut through foundations, doorway openings for remodels, patio and walkway sections removed for replacement, and garage slabs trenched for new drains. Whatever the mix, the crew that cuts, removes and pours back is the same one that answers the phone: (206) 901-9383, 24/7.